Stihl FS561C-EM Brushcutter
RRP is £1,640.00 (Inc VAT)
Boxing Day Sale Saving Of £358.00
Stihl FS561C-EM Brushcutter Description
The Stihl FS561C-EM clearing saw is a must-have for any professional arborist or land manager. This powerful saw is capable of clearing large areas of overgrown vegetation quickly and easily, making it the perfect tool for clearing paths, cutting back brush, and removing small trees.
The FS561C-EM is powered by a 2-stroke engine that produces 2.8 kW of power. This gives the saw the muscle it needs to cut through even the toughest branches and saplings. The saw also features a large cutting swath of 22 inches, which allows you to clear ground quickly and efficiently.
In addition to its power and cutting capacity, the FS561C-EM is also built to be durable and reliable. The saw features a reinforced shaft and a 4-point anti-vibration system that helps to reduce operator fatigue. The saw also has a number of other features that make it easy to use, such as an ErgoStart system that makes it easier to start the engine, and a multi-function handlebar that allows you to adjust the controls to your liking.
Stihl FS561C-EM Brushcutter Features
STIHL M-Tronic - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Bike handle - When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
ADVANCE forestry harness - Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Stihl FS561C-EM Brushcutter Specification
Model FS 561 C-EM
Displacement 57.1cm3
Power Output 2.8kW / w3.8hp
Weight 10.2kg
Sound Pressure Level 102dB(A)
Sound Power Level 115dB(A)
Vibration Level (L/R) 3.3/3.3m/s2
Total Length without cutting tool 176cm
Standard Cutting Tool Woodcut 225-24 Saw Blade
Tank Volume 0.99L
Drive Shaft in Shaft Solid
Stihl Anti Vibration System 4-Point
STIHL ErgoStart (E) Yes
Multi-Function Handle Yes
Loop Handle / Bike Handle Bike Handle
Tool-less Handle Adjustment Yes
Harness/Carrying System Yes
Stihl Engine (Mix) 2-MIX
Stihl M-Tronic (M) Yes
Mowing/Shredding/Sawing Jobs Standard - Sawing Jobs / Retrofittable - Mowing & Shredding Jobs
Warranty 2 Years
Stihl FS561C-EM Brushcutter Promotions
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!
Stihl FS561C-EM Brushcutter Arrange a Consultation
$INSERT:Consult$The Stihl FS561C-EM clearing saw is a must-have for any professional arborist or land manager. This powerful saw is capable of clearing large areas of overgrown vegetation quickly and easily, making it the perfect tool for clearing paths, cutting back brush, and removing small trees.
The FS561C-EM is powered by a 2-stroke engine that produces 2.8 kW of power. This gives the saw the muscle it needs to cut through even the toughest branches and saplings. The saw also features a large cutting swath of 22 inches, which allows you to clear ground quickly and efficiently.
In addition to its power and cutting capacity, the FS561C-EM is also built to be durable and reliable. The saw features a reinforced shaft and a 4-point anti-vibration system that helps to reduce operator fatigue. The saw also has a number of other features that make it easy to use, such as an ErgoStart system that makes it easier to start the engine, and a multi-function handlebar that allows you to adjust the controls to your liking.
STIHL M-Tronic - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Bike handle - When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
ADVANCE forestry harness - Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Model FS 561 C-EM
Displacement 57.1cm3
Power Output 2.8kW / w3.8hp
Weight 10.2kg
Sound Pressure Level 102dB(A)
Sound Power Level 115dB(A)
Vibration Level (L/R) 3.3/3.3m/s2
Total Length without cutting tool 176cm
Standard Cutting Tool Woodcut 225-24 Saw Blade
Tank Volume 0.99L
Drive Shaft in Shaft Solid
Stihl Anti Vibration System 4-Point
STIHL ErgoStart (E) Yes
Multi-Function Handle Yes
Loop Handle / Bike Handle Bike Handle
Tool-less Handle Adjustment Yes
Harness/Carrying System Yes
Stihl Engine (Mix) 2-MIX
Stihl M-Tronic (M) Yes
Mowing/Shredding/Sawing Jobs Standard - Sawing Jobs / Retrofittable - Mowing & Shredding Jobs
Warranty 2 Years
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!