Hansa C13 PTO Chipper
RRP is £4,800.00 (Inc VAT)
Christmas Savings Of £145.00
Hansa C13 PTO Chipper Description
Small-scale farmers and orchardists need look no further. Simply connect this chipper to a 540 RPM PTO and you will have a machine with the same capabilities as its engine-powered counterpart. With easy access to the knives and belts, knife maintenance is straightforward. Fits any compact tractor between 17 and 45 horsepower.
The C13PTO enhances the capabilities of your tractor. Compatible with all 17 to 45 horsepower tractors with a 540 RPM PTO drive. This 191-kilogram chipper's low centre of gravity allows for a smooth journey over rough terrain. Equipped with a PTO shaft, the unit can be attached to a tractor to reach difficult-to-reach areas with simplicity.
The C13PTO offers exceptional efficacy in terms of self-feeding. The 36 kilogramme cutting disc rotates at 1,530 revolutions per minute, producing self-perpetuating inertia. The 170 x 220 mm infeed opening is pulled into the machine quickly and effectively by the airflow produced by the wing-shaped cutting disc. The 1450 mm height of the outlet chute enables the user to transfer chip onto a trailer, ute or stockpile.
Designed and manufactured in New Zealand with the highest quality materials for a lifetime of use. The belt drive between the engine and the cutting disc enables seamless operation and protects the PTO drive from shock loading.
The steel construction and powdercoated finish with zinc shield corrosion protection provide durability.
By removing two fasteners from the housing, routine servicing and maintenance can be performed with ease. The two blades made from modified A8 steel have a remarkable lifespan and can be sharpened up to ten times. To gain access to the belts, merely remove the belt guard.
Hansa C13 PTO Chipper Specification
Max Capacity: 90mm
Driveshaft Speed: PTO540RPM
Tractor Power: 17-45HP
Inlet Chute size: 170 x 220mm
Weight: 191kg
Knife Quantity: 2
Hansa C13 PTO Chipper Delivery Information
All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.
We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.
- GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
- AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge
For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.
Small-scale farmers and orchardists need look no further. Simply connect this chipper to a 540 RPM PTO and you will have a machine with the same capabilities as its engine-powered counterpart. With easy access to the knives and belts, knife maintenance is straightforward. Fits any compact tractor between 17 and 45 horsepower.
The C13PTO enhances the capabilities of your tractor. Compatible with all 17 to 45 horsepower tractors with a 540 RPM PTO drive. This 191-kilogram chipper's low centre of gravity allows for a smooth journey over rough terrain. Equipped with a PTO shaft, the unit can be attached to a tractor to reach difficult-to-reach areas with simplicity.
The C13PTO offers exceptional efficacy in terms of self-feeding. The 36 kilogramme cutting disc rotates at 1,530 revolutions per minute, producing self-perpetuating inertia. The 170 x 220 mm infeed opening is pulled into the machine quickly and effectively by the airflow produced by the wing-shaped cutting disc. The 1450 mm height of the outlet chute enables the user to transfer chip onto a trailer, ute or stockpile.
Designed and manufactured in New Zealand with the highest quality materials for a lifetime of use. The belt drive between the engine and the cutting disc enables seamless operation and protects the PTO drive from shock loading.
The steel construction and powdercoated finish with zinc shield corrosion protection provide durability.
By removing two fasteners from the housing, routine servicing and maintenance can be performed with ease. The two blades made from modified A8 steel have a remarkable lifespan and can be sharpened up to ten times. To gain access to the belts, merely remove the belt guard.
Max Capacity: 90mm
Driveshaft Speed: PTO540RPM
Tractor Power: 17-45HP
Inlet Chute size: 170 x 220mm
Weight: 191kg
Knife Quantity: 2
Hansa C13 PTO Chipper Delivery Information
All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.
We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.
- GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
- AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge
For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.