Stihl MS661C-M 36" Chainsaw
RRP is £1,784.00 (Inc VAT)
Christmas Savings Of £348.00
Stock: Out Of Stock
Stihl MS661C-M 36" Chainsaw Description
The MS661 C-M is the new big timer saw for the toughest forestry jobs. M-Tronic guarantees optimum engine performance at all times and easy starting thanks to one start position and new stop button function, controlled-delivery high performance oil pump for high flow rate. with a new easy-clean HD2 Filter and an environmentally friendly and economical STIHL 2-MIX engine. This saw is also used as the new competition saw for the STIHL TIMERSPORTS Series. Available in different bar lengths of 20", 25", 28" and 36"
Stihl MS661C-M 36" Chainsaw Features
Combi lever - As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL M-Tronic (M) - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
Advanced combustion technology - Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
HD2 filter - The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
Anti-vibration system - Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Decompression valve - The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
Pre-separation air filtration system - STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Captive nuts - When changing the cutting attachment, you will not risk losing the nuts on the sprocket.
Ematic chain lubrication system - The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Single-lever master control - All important functions such as start, choke, throttle and stop are operated via a single lever.
Side chain tensioner - The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
STIHL ElastoStart - STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.
Tool free filler caps - Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Stihl MS661C-M 36" Chainsaw Specification
Model MS661 C-M
Bar Length 36" (91cm)
Displacement 91.1cm3
Power Output 5.4kW
Weight 7.4kg
Power-to-weight ratio 1.4kg/kw
Sound Pressure Level 105dB(A)
Sound Power Level 118dB(A)
Vibration Values (L/R) 5.5/5.5m/s2
STIHL Oilomatic saw chain pitch/type 3/8" RS
Warranty 2 Years
Stihl MS661C-M 36" Chainsaw Promotions
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!
Stihl MS661C-M 36" Chainsaw Arrange a Consultation
The MS661 C-M is the new big timer saw for the toughest forestry jobs. M-Tronic guarantees optimum engine performance at all times and easy starting thanks to one start position and new stop button function, controlled-delivery high performance oil pump for high flow rate. with a new easy-clean HD2 Filter and an environmentally friendly and economical STIHL 2-MIX engine. This saw is also used as the new competition saw for the STIHL TIMERSPORTS Series. Available in different bar lengths of 20", 25", 28" and 36"
Combi lever - As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL M-Tronic (M) - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
Advanced combustion technology - Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Compensator - This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
HD2 filter - The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
Anti-vibration system - Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Decompression valve - The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
Pre-separation air filtration system - STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Captive nuts - When changing the cutting attachment, you will not risk losing the nuts on the sprocket.
Ematic chain lubrication system - The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Single-lever master control - All important functions such as start, choke, throttle and stop are operated via a single lever.
Side chain tensioner - The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
STIHL ElastoStart - STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.
Tool free filler caps - Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Model MS661 C-M
Bar Length 36" (91cm)
Displacement 91.1cm3
Power Output 5.4kW
Weight 7.4kg
Power-to-weight ratio 1.4kg/kw
Sound Pressure Level 105dB(A)
Sound Power Level 118dB(A)
Vibration Values (L/R) 5.5/5.5m/s2
STIHL Oilomatic saw chain pitch/type 3/8" RS
Warranty 2 Years
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!